If you don't have a chlorine generator on your spa, time to get one. You will be amazed!

Best price online, click image above.

If you are wondering if it is wise to change to a salt system and are worried about what the salt may do to your spa, then worry no more! The amount of salt that you will be using to keep the sanitation of your spa is a lot lower then you think and is safe for your spa equipment. If you are having problems then your chlorine generator may not be working properly or you may have too much salt in the spa.

The wonder of using a salt chlorine generator system is that once the hypochlorous acid is used, the chlorine turns back into salt. So once you have added the correct amount of salt to your hot tub or spa, you will only have to take into account the amount of water that splashes out. This economical method saves you time and money!

When you hear of people using salt in their pools or spas instead of chlorine or bromine, they can make it sound as though it’s the chemical free method. This is a false interpretation. In the chemistry world, life cannot exist without chemicals and in fact water and salt are two common chemicals that we come in contact with daily. The salt chlorine generator systems are really there to make the most of the natural chemistry.
There are many people who find themselves with itchy and irritated skin when using a chlorine pool or spa but have found that they do not have the same troubles when using a salt system. A salt chlorine generator allows you to have more control of sterilizer output that frequently requires lower levels to attain pure water.

Seems like there has always been chlorine generators for pools. Now there are a few making them for spas and ControlOMatic has partnered with HornerXPress to make the ColorChlor and TechniChlor hot tub and spa chlorine generator available internationally.

Grass Valley, California — ControlOMatic, a manufacturer and developer of salt water chlorine generators, has partnered with HornerXPress, a world wide distributor based in Ft. Lauderdale, Florida to distribute its primary brands, ColorChlor and TechniChlor.

ColorChlor and TechniChlor are chlorine generators specifically designed for spa and hot tub use. These portable and easy to use chlorinators automatically sanitize spa water by converting skin softening salts into chlorine, eliminating the time and need to store and pour traditional liquid, granule or tablet sanitizing products. There are no buttons, no moving parts, no separate control boxes or timers which make these products so simple to operate and install. Simply program each model to one of ten chlorine generation power levels based on spa size and usage, and they'll take care of the rest.

ColorChlor®, the flagship brand combines ten levels of chlorine production with 13 dazzling light shows to rejuvenate older portable hot tubs that may not have LED lights built in. Light shows include brilliant solid colors from bright red to aqua blue, rainbow fades, quick flashing strobes and many colors in between. The simple and fun to watch LED light indicators measure water temperature too!

TechniChlor™, uses the same no buttons, no moving parts, LED indicator technology as its counterpart above, but is conveniently built without light show entertainment. TechniChlor™ is a chlorine generator specifically designed for consumers that are just looking for pure chlorination or may own a spa that already have multi-colored lights built in. Save time and money with TechniChlor™, while it takes care of your sanitation needs!

Scott Lenney, CEO and Founder of ControlOMatic and Bill Kent, CEO and Founder of Horner Xpress, believe this strategic partnership will successfully fill a market void that has long been vacant in the pool and spa industry. "Chlorine Generator technology has been around for 30 years in the pool industry…, we have tapped into that same technology and successfully applied it to a hot water environment in the portable spa market," says Lenney.

You must use non-iodized salt in your spa or pool. This pure salt prevents the water from yellowing over time. You will find that salt is sold in a variety of sizes and a wide range of scents. You can also use a water softener salt but it may take longer to dissolve because it is very similar to rock salt.

Chlorine Generators were created to assist you in having the least amount of maintenance for your pool or spa. Now you will still have to do some maintenance, but it will very on how often it is used and weather conditions. Simply add salt to the water, less than 2 pounds per 100 gallons. The chlorine generator will convert that salt to chlorine and they work all day, 365 days a year.

There are many advantages to using a chlorine generator. Here are the some of the main features and benefits for using a chlorine generator:
*Eco-friendly
*Improved water quality – softer, clearer & cleaner water.
*Reduced maintenance – Set it once and the generator takes care of it from there.
*More natural water sanitation by producing chlorine on site – in your spa.
*No more storing and pouring smelly chlorine or bromine liquids or tablets and having to discard their carbon rich containers.
*All natural salts used with a generator provide continued skin softening benefits.

When you get a saltwater chlorine generator you are making a statement that you are going to be buying and using fewer chemicals, and part of the reduced maintenance is that you don't have to check your pool chemical balance very often. This isn't entirely true, you may still need to periodically shock the water and you should measure the chemical balance prior to use if it is a spa and at least once a week if a pool. Over time the chlorine demand of the water will go up as more and more organic material enter the water. A point may be reached where the chlorine demand for the water is the same or exceeds the chlorine output from your electronic chlorinator. You will notice that when the chlorine is low it takes longer over time for it to bring the chlorine levels back up. You may also have to increase the power level to make more chlorine as the water is consuming more chlorine than your chlorine generator can make at the lower power level. This is more likely to happen in a Spa that is used often and if you have a spa chlorine generator. A Spa chlorinator is designed to make much less chlorine than a pool chlorinator as you do not want to over-chlorinate your spa which could lead to corrosion.

Pool or spa shocking is the addition of a sufficient dose of chlorine: calcium hypochlorite (cal-hypo), liquid chlorine, sodium dichlor or non-chlorine shock (potassium monopersulfate or MPS). The purpose of a shock treatment is to break-down organic waste contaminants which cause odor, cloudy water, and a decrease in the efficiency of saltwater chlorinators. After treatment, water quality and clarity are often completely restored and you may be able to lower the power level of the saltwater chlorine generator.

When a spa is used every day there can be a quick buildup of organic material, and the water may look just fine and not smell, but the spa chlorine generator is having a harder time keeping up as the days go buy. If you increase the power level of the spa chlorinator that will also decrease the life span of the chlorinator as it will be on longer each day. Shocking the spa is a better alternative and you have to decide on a chlorine or chlorine-free shock.

• If you don't want to add chlorine, then the chlorine-free shock is the way to go. Just follow the directions on the container.
• If you don't mind adding chlorine the spa chlorine generator will not mind. This will shock the spa water, and give it some chlorine which is less chlorine that the electronic chlorinator has to make. 

We monitor various Internet sites and have found this new review of an electronic spa chlorine generator by ControlOMatic.  More details can be found at ColorChlor. If you have a spa you may want to look this one up and the rest of the reviews.

David B says: June 10, 2010 at 1:05 am

I purchased your ColorChlor chlorinator unit 1 month ago and want to share the results of my experience. Based on my experience so far:

• ColorChlor effectively maintains my spa in clear-water condition without any burdensome addition of sanitizers. No longer do I worry about the condition of my spa between uses because the product maintains a sufficient level of chlorine (hypochlorous acid) so my spa is ready when I am.
• I feel confident in ColorChlor because it continually generates chlorine over time, so free chlorine is always present, but levels stay low and stable. This maximizes sanitation and minimizes the risk of corrosion, present with any sanitizing system in spas.
• The one-time setup and ongoing use is simple: 8 pounds of salt one time from my local store (~$4) and plug-in ColorChlor to a standard outlet (weather protected). This took less than 1 hour. Now using it is as simple as Drop-and-Go!

Previously, I used chlorinating granules which required frequent and continual addition, whether I used my spa or not. I never minded adding this to my spa when I used it, but to have to add it when not using the spa felt like I was babysitting it. Plus, when I took trips for as little as a week, I had to take time to drain the spa or risk returning to a skunked, murky spa – yuck! Now, when I leave, I can trust ColorChlor to maintain my spa so its clear and clean when I return.

 True, I still have to maintain pH and check the filter, but those change little when my spa is not in use. And for large parties (like my Memorial Day bash with 12 guests in/out of the spa all day), I need supplemental chlor (bleach) to offset extreme amounts of organic material. But since I am at the spa anyway – adding a cup of chlor occasionally is not inconvenient. It’s remembering to constantly add sanitizer that’s inconvenient – which I no longer need to do with ColorChlor.

 And I should cut my water replacement frequency at least by half every year, because using ColorChlor does not accumulate compounds (stabilizers/cyanuric acid) found in sanitation tablets/granules that eventually lead to spa water that must be replaced because it cannot be cleared. Technically, my spa water should now be like my pool – and I never have had to change that water (6 years+).